You are here > Industrial > Reverse Osmosis Systems

R13 Compact Wall Mount RO

Three models for flow rates to 1200 GPD


Standard Features
  • Powder coated steel frames
  • Inlet solenoid valve
  • Pre-filter
  • 1/2 HP motor
  • Brass pump
  • Liquid filled pre-filter pressure gauge
  • 2 1/2" liquid filled pre-filter pressure gauge
  • Product water & reject water flow meters
  • High pressure, non-metallic membrane housings
  • SS needle valves for concentrate and recycle lines
  • Stainless steel product water check valve
  • On / Off toggle switch
  • Low-pressure shut-off with auto restart
  • Feed water and product water TDS monitor


Specifications
Feed water connection
3/4" NPTF
Product water connection
3/8" Tubing OD
Reject water connection
3/8" Tubing OD
Feed water required (max.)
2.4 GPM
Feed water pressure (min.)
10 PSI
Drain required (max.)
2.4 GPM
Electrical Requirements
120 VAC 60 Hz
Amps
8
Pump (H.P.)
1/2


Options
R2868 Leg Kit
R2353-SD Product float switch
R2288 Whole house option*
Includes 300 gal tank,
product float switch and
repressurization pump
with built in controls.

        
Applications
  • Whole house
  • Ice makers
  • Labs
  • Beverages
  • Coffee shops
  • Restaurants
Note: For indoor installation only.



Models
  R13-0250
R13-0600 R13-1200
Maximum production (gallons per day)
250 600
1200
Average membrane rejection rate
98%  98%  98%
Recovery (adjustable)
8 - 75%
17 - 75%
34 - 75%
Membrane size
3" x 10"
3" x 20"
3" x 20"
Number of membranes
1 (P/N R96310)
1 (P/N R96320)  1 (P/N R96320) 
Pre-filter (system ships with one 5 micron cartridge)
10"
20"
20"
Dimensions, approximate (W x H x D)
26" x 26" x 9"
26" x 36" x 9"  26" x 36" x 9" 
Shipping Weight, estimated (lbs.)
50
60
75
Note: Performance specifications are based on 77°F feed water, SDI <3, TDS below 1000 ppm and pH of 8. Individual membrane productivity and rejection rates are based on manufacturer's specifications. Please see water temperature conversion charts for production factor. Chlorine reduction and other pretreatment may be required. Systems are designed for use with municipal and well water.
  

R4X40 Series Whole House RO

Three models for flow rates up to 6,600 GPD

Standard Features
  • Powder coated steel frame
  • Inlet solenoid valve
  • 20” prefilter
  • Prefilter pressure gauge
  • Multistage centrifugal pump
  • Low-pressure protection with microprocessor auto reset
  • 2 1/2” liquid filled pump pressure gauge
  • Stainless steel pressure vessel(s)
  • Product flow meter
  • Reject flow meter
  • Concentrate needle valve
  • Non metallic recycle needle valve
  • Feed water and product water TDS monitor

Applications
  • Whole house
  • Boiler feed water
  • Humidifiers
  • Greenhouses
  • Process Water
  • Electronics


Specifications

Membrane Size 4” x 40”
Average membrane rejection 98 %
Feed Water Connection 3/4" NPTF
Prefilter 2.5” x 20”
Product Water Connection 5/8" tubing OD
Reject Water Connection 5/8" tubing OD
Feed Water Pressure (minimum) 10 psi
Electrical Requirement* 120 VAC 60 Hz



Options

Part Number Description
R2353-SD Product float switch
R2288-165 165 gal tank whole house option*
R2288 300 gal tank whole house option*
R2288-500 500 gal tank whole house option*
*Includes atmospheric storage tank, product float switch, and repressure pump with built in controls.


Note: For indoor installation only.

Models

  R4X40-1 R4X40-2 R4X40-3-230
Maximum Productivity (gallons per day) 2200 4400 6600
Recovery (user adjustable) 15 - 75% 25 - 75% 32 - 75%
Number of membranes 1 2 3
Feed water required (maximum) 10 gpm 12 gpm 14 gpm
Drain required (maximum) 10 gpm 12 gpm 14 gpm
Motor Horse Power 3/4 1 1 1/2
Electrical Requirement* 15 amps 20 amps 25 amps
Dimensions W x D x H 20 x 20 x 50 20 x 20 x 50 20 x 26 x 50
Shipping Weight (estimated lbs) 120 150 180
Notes: Maximum production based on a feed water of 77°F, SDI < 1, 1000 ppm TDS, and pH 7. Individual membrane productivity may vary (± 15%). May be operated on other feed waters with reduced capacity. Percent Rejection is based on membrane manufactures specifications; overall system percent rejection may be less. *R4X40-3 is available only in 230-volt single phase.

R4X40 Deluxe Series Whole House RO

Three models for flow rates up to 6,600 GPD


Standard features
  • Powder coated steel frame
  • Inlet solenoid valve
  • 20” prefilter
  • Prefilter pressure gauge
  • Multistage centrifugal pump
  • Low-pressure protection with microprocessor auto reset
  • Tank level input (dry contact)
  • Pretreatment interlock input (dry contact)
  • 2 1/2” liquid filled pump pressure gauge
  • Stainless steel pressure vessel(s)
  • Product flow meter
  • Reject flow meter
  • Concentrate needle valve
  • Non metallic recycle needle valve
  • Feed water and product water TDS monitor

Applications
  • Whole house
  • Boiler feed water
  • Humidifiers
  • Greenhouses
  • Process Water
  • Electronics
  • Car wash spot-free


Specifications
Membrane Size 4” x 40”
Average membrane rejection 98%
Feed Water Connection 3/4" NPTF
Prefilter 2.5” x 20”
Product Water Connection 5/8" tubing OD
Reject Water Connection 5/8" tubing OD
Feed Water Pressure (minimum) 10 psi
Electrical Requirement 230 VAC 60 Hz, 1 PH


Options

part number description
R2350-SD Product float switch
R2288-165 165 gal tank whole house option*
R2288 300 gal tank whole house option*
R2288-500 500 gal tank whole house option*
*Includes atmospheric storage tank, product float switch, and repressure pump with built in controls.
Note: For indoor installation only.



Models

  r4X40-1-220-DLX r4X40-2-220-DLX r4X40-3-220-DLX
Maximum Productivity (gallons per day) 2200 4400 6600
Recovery (user adjustable) 15 - 75 % 25 –75% 32 - 75 %
Number Of Membranes 1 2 3
Feed Water Required (maximum) 10gpm 12 gpm 14 gpm
Drain Required (maximum) 10gpm 12 gpm 14 gpm
Motor Horse Power 3/4 1 1 1/2
Electrical Requirement 8 amps 10 amps 12 amps
Dimensions W x D x H 20 x 20 x 50 20 x 20 x 50 20 x 26 x 50
Shipping Weight (estimated lbs) 120 150 180
Notes: Maximum production based on a feed water of 77°F, SDI < 1, 1000 ppm TDS, and pH 7. Individual membrane productivity may vary (± 15%). May be operated on other feed waters with reduced capacity. Percent Rejection is based on membrane manufactures specifications; overall system percent rejection may be less.

R12 Series Wall-Mounted RO Systems

Compact, Wall-Mounted Systems
Four models for flow rates to 1200 GPD.


Standard Features (Package #1)
  • Stainless steel frame
  • Automatic inlet valve
  • Pre-filter housing and cartridge, 10"
  • Procon pump (brass)
  • 1/2 HP motor
  • Liquid filled pump pressure gauge (2-1/2")
  • Stainless steel pressure vessels
  • Needle valve for concentrate line
  • Needle valve for recycle line
  • Check valve for product water (stainless steel)
  • Product pressure switch with Auto/Off
  • Low-pressure shut-off with automatic restart

Additional Features Included In Package #2

  • Pre-filter pressure gauges
  • Product water flow meter
  • Reject water flow meter

Additional Features Included In Package #3
  • Automatic fast flush for concentrate


Specifications
Product water & reject water connection (tubing) 3/8"
Feed water requirement (maximum) 2.4 GPM
Feed water pressure requirement (maximum) 10 PSIG
Drain requirement (maximum) 2.4 GPM
Electrical requirement 120v/60hz
Amps 8
Pump 1/2 HP


Options
Part Number Description
R2864 Stainless steel leg kit
R2353-SD Product water float switch
R2288 Whole house option*
*Includes 300 gallon tank, product water float switch and repressurization pump with built-in controls.

Models
Model Number Package GPD Recovery
(Adjustable)
Membrane
Size
Number of
Membranes
Feed Water
Connection
Typical
Rejection
Dimensions Ship Wt.
(lbs.)
R12-0150-1 1 150 15%-75% 2-1/2"x14" 1 1/2" NPT 98% 22"x32"x12" 50
R12-0150-2 2 150 15%-75% 2-1/2"x14" 1 1/2" NPT 98% 22"x32"x12" 50
R12-0150-3 3 150 15%-75% 2-1/2"x14" 1 1/2" NPT 98% 22"x32"x12" 50
R12-0250-1 1 250 15%-75% 2-1/2"x21" 1 1/2" NPT 98% 22"x32"x12" 50
R12-0250-2 2 250 15%-75% 2-1/2"x21" 1 1/2" NPT 98% 22"x32"x12" 50
R12-0250-3 3 250 15%-75% 2-1/2"x21" 1 1/2" NPT 98% 22"x32"x12" 50
R12-0600-1 1 600 15%-75% 2-1/2"x40" 1 1/2" NPT 98% 22"x52"x12" 60
R12-0600-2 2 600 15%-75% 2-1/2"x40" 1 1/2" NPT 98% 22"x52"x12" 60
R12-0600-3 3 600 15%-75% 2-1/2"x40" 1 1/2" NPT 98% 22"x52"x12" 60
R12-1200-1 1 1200 25%-75% 2-1/2"x40" 2 1/2" NPT 98% 22"x52"x12" 70
R12-1200-2 2 1200 25%-75% 2-1/2"x40" 2 1/2" NPT 98% 22"x52"x12" 70
R12-1200-3 3 1200 25%-75% 2-1/2"x40" 2 1/2" NPT 98% 22"x52"x12" 70
Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro® FPMB5-978 melt blown cartridge. Systems are designed for use with municipal and well water.

R14 Series Wall-Mounted RO Systems

Compact, Wall-Mounted Systems
Three models for flow rates to 5400 GPD, available with brass and stainless steel fittings.


Standard Features
  • Stainless steel frame
  • Stainless steel pressure vessels
  • Pre-filter housing and cartridge, 10" Full-Flow
  • Webtrol® multi-stage centrifugal pump
  • Automatic inlet valve
  • Low-pressure shut-off with automatic restart
  • Tank level input
  • Pretreatment interlock input
  • Adjustable recycle line
  • Pre-filter pressure gauges
  • Pump discharge pressure gauge (liquid filled)
  • Flow meter for product water
  • Flow meter for reject water
  • Check valve for product water
  • Sample valve for product water
  • On / off switch


Specifications
Feed water connection 1" FNPT
Product water connection (1800 & 3600 GPD) 1/2" tube
Reject water connection (all R14 models) 1/2" tube
Feed water pressure requirement (minimum) 10 PSIG
Drain requirement (maximum) 10 GPM
Electrical requirement 230v/60hz
Amps (1800 & 3600 GPD) 6
Amps (5400 GPD) 9


Options
Part Number Description
R2353-SD Product water float switch
R2288 Whole house option*
*Includes 300 gallon tank, product water float switch and repressurization pump with built-in controls.


Models
Model Number Fittings
&
Valves
GPD Pump
(H.P.)
Recovery
(Adjustable)
Membrane
Size
Membranes Feed Water
Required
(GPM)
Typical
Rejection
Dimensions Ship
Wt.
(lbs.)
R14-01-1WM SS 1800 1 15%-75% 4" x 40" 1 2.5 98% 41"x51"x18" 200
R14-01-BWM Brass 1800 1 15%-75% 4" x 40" 1 2.5 98% 41"x51"x18" 200
R14-02-1WM SS 3600 1 25%-75% 4" x 40" 2 5 98% 41"x51"x18" 250
R14-02-BWM Brass 3600 1 25%-75% 4" x 40" 2 5 98% 41"x51"x18" 250
R14-03-1WM SS 5400 1.5 35%-75% 4" x 40" 3 7.5 98% 41"x51"x18" 300
R14-03-BWM Brass 5400 1.5 35%-75% 4" x 40" 3 7.5 98% 41"x51"x18" 300
*At 50% recovery. Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro® FPMB-BB5-10 melt blown cartridge. Systems are designed for use with municipal and well water.

R14 Series Floor Model RO Systems

Top Quality, Attractively Priced, Fully Assembled RO systems
Five models for flow rates to 10,800 GPD. Select the features you want to meet your requirements!


Standard Features (Package #1)
  • Powder coated steel frame
  • Stainless steel pressure vessels
  • Pre-filter housing and cartridge (20" Full-Flow)
  • Webtrol® heavy-duty multi-stage centrifugal pump
  • Automatic inlet valve
  • Low-pressure shut-off with automatic restart
  • Tank level input
  • Pretreatment interlock input
  • Adjustable recycle line
  • Pre-filter pressure gauges
  • Pump discharge pressure gauge (liquid filled)
  • Flow meter for product water
  • Flow meter for reject water
  • Flow meter for recycle water
  • Check valve for product water
  • On / off switch

Additional Features Included With Package #2
  • CI-1000 electronic controller with product water conductivity meter and alarm output
  • Programmable concentrate auto flush


Specifications
Feed water connection 1" FNPT
Product water connection 3/4" FNPT
Reject water connection 3/4" FNPT
Feed water pressure requirement (min.) 10 PSIG
Drain requirement (maximum) 15 GPM
Electrical requirement 230VAC/60hz
Phase 3
Amps 15


Models
Model Number Package GPD Pump
(H.P.)
Recovery
(Adj.)
Membrane
Size
Membranes Feed Water
Required*
(GPM)
Typical
Rejection
Dimensions Ship
Wt.
(lbs.)
R14-02-1111000 1 3600 5 25%-75% 4" x 40" 2 5 98% 60"x18"x56" 400
R14-02-1131000 2 3600 5 25%-75% 4" x 40" 2 5 98% 60"x18"x56" 400
R14-03-1111000 1 5400 5 36%-75% 4" x 40" 3 7.5 98% 60"x18"x56" 500
R14-03-1131000 2 5400 5 36%-75% 4" x 40" 3 7.5 98% 60"x18"x56" 500
R14-04-1111000 1 7200 5 42%-75% 4" x 40" 4 10 98% 60"x18"x56" 600
R14-04-1131000 2 7200 5 42%-75% 4" x 40" 4 10 98% 60"x18"x56" 600
R14-05-1111000 1 9000 5 46%-75% 4" x 40" 5 12.5 98% 60"x18"x56" 700
R14-05-1131000 2 9000 5 46%-75% 4" x 40" 5 12.5 98% 60"x18"x56" 700
R14-06-1111000 1 10800 5 50%-75% 4" x 40" 6 15 98% 60"x18"x56" 800
R14-06-1131000 2 10800 5 50%-75% 4" x 40" 6 15 98% 60"x18"x56" 800
*At 50% recovery. Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro® FPMB-BB5-20 melt blown cartridge. Systems are designed for use with municipal and well water.

Light Commercial RO Systems

All systems are frame mounted.



Specifications
Model
Number
GPD Pump Stage 1 Stage 2 Stage 3 Stage 4 Carton
Dimensions
Shipping
Wt. (lbs.)
LC-200P 200 1 IF-SP-2005 FI-CT0020/2 MM-TFF90/160 (2) FI-GAC020HP 36x21x10 46
LC-300P 260 1 IF-SP-2005 FI-CT0020/2 MM-TFF90/160 (3) FI-GAC020HP 36x21x10 48
LC-380PP 380 2 IF-SP-2005 FI-CT0020/2 FI-CT0020/2 MM-1812-100D (3) 36x21x10 53
FMRO5-150G 150 None Unit with two 75 GPD membranes, carbon block pre-filter, auto shot-off, 3/8” fittings. No pump.


Spare Parts
Part Number Description LC-100P LC-200P LC-200P-MINI LC-300P LC-380PP
FC-DR550W Flow restrictor 550 ML/Min X


FC-DR850W Flow restrictor 850 ML/Min
X X
FC-DR1000W Flow restrictor 1000 ML/Min


X
FC-DR1200W Flow restrictor 1200 ML/Min



X
PU-8800ESO-38 Electric shut off valve, 3/8” X X X X X
PU-8010TSO Tank shut off valve X X X X X
NOTE: All systems come with pressure gauges and booster pump. Tank and feed water saddle valves are not included.

R24 Series Commercial RO Systems

Three models and two design options
for flow rates up to 15 GPM.


Specifications
Feed water connection
1" FNPT
Product water connection 1" FNPT
Reject water connection
3/4" FNPT
Feed water pressure requirement (min.) 10 PSIG
Drain requirement (maximum) 17, 21, 25 GPM
Electrical requirement 230VAC/60Hz
Phase 3
Amps 20


Standard Features (Package #1)
  • Powder coated steel frame
  • FRP multi-port pressure vessels
  • Pre-filter housing and cartridge (20” B-B)
  • Webtrol® multi-stage centrifugal pump
  • Automatic inlet valve
  • Low-pressure shut-off with auto restart
  • Tank level input
  • Pretreatment interlock input
  • Adjustable recycle line
  • Pre-filter pressure gauges
  • Pump discharge pressure gauge
  • Flow meter for product water
  • Flow meter for reject water
  • Flow meter for recycle water
  • Check valve for product water
  • Sample valves for product water
  • On / off switch

Additional Features Included With Package #2

  • CI-1000 electronic controller with product water conductivity meter and alarm output.
  • Programmable concentrate auto flush.

Models
Model Number Package Gallons Per Minute Pump (H.P.) Recovery (Adj.) Membrane Size Membrane Array Feed Water Required* (GPM) Typical Rejection Dimensions Ship Wt. (Lbs.)
R24-08-1111000 1 10 7.5/TEFC 60%-75% 4"x40" 2:1:1 17 98% 96"x24"x72" 800
R24-08-1131100 2 10 7.5/TEFC 60%-75% 4"x40" 2:1:1 17 98% 96"x24"x72" 800
R24-10-1111000 1 12.5 7.5/TEFC 60%-75% 4"x40" 2:1:1 21 98% 96"x24"x72" 900
R24-10-1131100 2 12.5 7.5/TEFC 60%-75% 4"x40" 2:1:1 21 98% 96"x24"x72" 900
R24-12-1111000 1 15 7.5/TEFC 60%-75% 4"x40" 3:1:1 25 98% 96"x24"x72" 1000
R24-12-1131100 2 15 7.5/TEFC 60%-75% 4"x40" 3:1:1 25 98% 96"x24"x72" 1000
*At 65% recovery.

Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is 20” Full-Flow plastic housing and Flow-Pro® FPMB-BB5-20 melt blown filter cartridge. Systems are designed for use with municipal and well water.

R44 Series Commercial RO Systems

Three models and two design options
for flow rates up to 30 GPM.


Specifications
Feed water connection
2" Flange
Product water connection 1.5" Flange
Reject water connection
1" Flange
Feed water pressure requirement (min.) 10 PSIG
Drain requirement (maximum) 31, 39, 46 GPM
Electrical requirement 230VAC/60Hz
Phase 3
Amps 30


Standard Features (Package #1)
  • Powder coated steel frame
  • FRP multi-port pressure vessels
  • Stainless steel pre-filter and cartridges
  • Webtrol® multi-stage centrifugal pump
  • Automatic inlet valve
  • Low-pressure shut-off with auto restart
  • Tank level input
  • Pretreatment interlock input
  • Adjustable recycle line
  • Pre-filter pressure gauges
  • Pump discharge pressure gauge
  • Flow meter for product water
  • Flow meter for reject water
  • Flow meter for recycle water
  • Check valve for product water
  • Sample valves for product water
  • On / off switch

Additional Features Included With Package #2

  • CI-1000 electronic controller with product water conductivity meter and alarm output.
  • Programmable concentrate auto flush.

Models
Model Number Package Gallons Per Minute Pump (H.P.) Recovery (Adj.) Membrane Size Membrane Array Feed Water Required* (GPM) Typical Rejection Dimensions Ship Wt. (Lbs.)
R44-16-1111000 1 20 10/TEFC 65%-75% 4"x40" 2:2 31 98% 192"x26"x72" 1400
R44-16-1131100 2 20 10/TEFC 65%-75% 4"x40" 2:2 31 98% 192"x26"x72" 1400
R44-20-1111000 1 25 10/TEFC 65%-75% 4"x40" 3:2 39 98% 192"x26"x72" 1600
R44-20-1131100 2 25 10/TEFC 65%-75% 4"x40" 3:2 39 98% 192"x26"x72" 1600
R44-24-1111000 1 30 10/TEFC 65%-75% 4"x40" 4:2 46 98% 192"x26"x72" 1800
R44-24-1131100 2 30 10/TEFC 65%-75% 4"x40" 4:2 46 98% 192"x26"x72" 1800
*At 65% recovery.

Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Max® FM4X3 filter housing, constructed
using 316 stainless steel and 2" MNPT pipe fittings and Flow-Pro® FPMB5-30 melt blown filter cartridges. Systems are designed for use with municipal and well water.

R48 Series Commercial RO Systems

Four models for flow rates up to 100 GPM.

Specifications
Feed water connection
See below
Product water connection (40 & 60 GPM)
2" Flange
Product water connection (40 & 60 GPM) 2.5" Flange
Reject water connection
1.5" Flange
Feed water pressure requirement (min.) 20 PSIG
Drain requirement (maximum) See below
Electrical requirement 460VAC/60Hz
Phase 3
Amps(based on model)
25, 30, 35, 40


Standard Features (Package #1)
  • Powder coated steel frame
  • FRP multi-port pressure vessels
  • Stainless steel pre-filter and cartridges
  • Webtrol® multi-stage centrifugal pump
  • Automatic inlet valve
  • Low-pressure shut-off with auto restart
  • Tank level input
  • Pretreatment interlock input
  • Adjustable recycle line
  • Pre-filter pressure gauges
  • Pump discharge pressure gauge
  • Flow meter for product water
  • Flow meter for reject water
  • Flow meter for recycle water
  • Check valve for product water
  • Sample valves for product water
  • On / off switch

Additional Features Included With Package #2
  • CI-2000 electronic controller with feed and product water conductivity meter with percent rejection.
  • Programmable concentrate auto flush.


Models
Model Number Gallons Per Minute Feed Water Connection
Pump (H.P.) Recovery (Adj.) Membrane Size Membrane Array Feed/Drain Required* (GPM) Typical Rejection Dimensions Ship Wt. (Lbs.)
R48-08-3131100 40 2" Flange 15/TEFC 65%-75% 8"x40" 1:1 62 98% 198"x42"x72" 2500
R48-12-3131100 60 2.5" Flange 20/TEFC 65%-75% 8"x40" 2:1 93 98% 198"x42"x72" 2800
R48-20-3131100 80 3" Flange 25/TEFC 65%-75% 8"x40" 2:2 123 98% 198"x42"x72" 3200
R48-20-1311100 100 3" Flange 30/TEFC 65%-75% 8"x40" 3:2 154 98% 198"x42"x72" 3500
Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature
conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required.
Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Max® FM7x4 filter housing, constructed using 316 stainless steel and 2" MNPT pipe fittings and Flow-Pro® FPMB5-40 melt blown filter cartridges. Systems are designed for use with municipal
and well water.