You are here > Residential > Whole House > Whole House RO

R4X40 Series Whole House RO

Three models for flow rates up to 6,600 GPD

Standard Features

  • Powder coated steel frame
  • Inlet solenoid valve
  • 20” prefilter
  • Prefilter pressure gauge
  • Multistage centrifugal pump
  • Low-pressure protection with microprocessor auto reset
  • 2 1/2” liquid filled pump pressure gauge
  • Stainless steel pressure vessel(s)
  • Product flow meter
  • Reject flow meter
  • Concentrate needle valve
  • Non metallic recycle needle valve
  • Feed water and product water TDS monitor

Applications

  • Whole house
  • Boiler feed water
  • Humidifiers
  • Greenhouses
  • Process Water
  • Electronics

Specifications

Membrane Size 4” x 40”
Average membrane rejection 98%
Feed Water Connection 3/4" NPTF
Prefilter 2.5” x 20”
Product Water Connection 5/8" tubing OD
Reject Water Connection 5/8" tubing OD
Feed Water Pressure (minimum) 10 psi
Electrical Requirement * 120 VAC 60 Hz



Options

part number Description
R2353-SD Product float switch
R2288-165 165 gal tank whole house option*
R2288 300 gal tank whole house option*
R2288-500 500 gal tank whole house option*
*Includes atmospheric storage tank, product float switch, and repressure pump with built in controls.
Note: For indoor installation only.



Models

  r4X40-1 r4X40-2 r4X40-3-230
Maximum Productivity (gallons per day) 2200 4400 6600
Recovery (user adjustable) 15 - 75 % 25 –75% 32 - 75 %
Number Of Membranes 1 2 3
Feed Water Required (maximum) 10gpm 12 gpm 14 gpm
Drain Required (maximum) 10gpm 12 gpm 14 gpm
Motor Horse Power 3/4 1 1 1/2
Electrical Requirement* 15 amps 20 amps 12 amps
Dimensions W x D x H 20 x 20 x 50 20 x 20 x 50 20 x 26 x 50
Shipping Weight (estimated lbs) 120 150 180
Notes: Maximum production based on a feed water of 77°F, SDI < 1, 1000 ppm TDS, and pH 7. Individual membrane productivity may vary (± 15%). May be operated on other feed waters with reduced capacity. Percent Rejection is based on membrane manufactures specifications; overall system percent rejection may be less. *R4X40-3 is available only in 230-volt single phase.

  

R4X40 Deluxe Series Whole House RO

Three models for flow rates up to 6,600 GPD

Standard Features

  • Powder coated steel frame
  • Inlet solenoid valve
  • 20” prefilter
  • Prefilter pressure gauge
  • Multistage centrifugal pump
  • Low-pressure protection with microprocessor auto reset
  • Tank level input (dry contact)
  • 2 1/2” liquid filled pump pressure gauge
  • Stainless steel pressure vessel(s)
  • Product flow meter
  • Reject flow meter
  • Concentrate needle valve
  • Non metallic recycle needle valve
  • Feed water and product water TDS monitor

Applications

  • Whole house
  • Boiler feed water
  • Humidifiers
  • Greenhouses
  • Process Water
  • Electronics
  • Car wash spot-free

Specifications

Membrane Size 4” x 40”
Average membrane rejection 98%
Feed Water Connection 3/4" NPTF
Prefilter 2.5” x 20”
Product Water Connection 5/8" tubing OD
Reject Water Connection 5/8" tubing OD
Feed Water Pressure (minimum) 10 psi
Electrical Requirement * 120 VAC 60 Hz



Options

part number Description
R2353-SD Product float switch
R2288-165 165 gal tank whole house option*
R2288 300 gal tank whole house option*
R2288-500 500 gal tank whole house option*
*Includes atmospheric storage tank, product float switch, and repressure pump with built in controls.
Note: For indoor installation only.



Models

  r4X40-1-dlx r4X40-2-dlx r4X40-3-230-dlx
Maximum Productivity (gallons per day) 2200 4400 6600
Recovery (user adjustable) 15 - 75 % 25 –75% 32 - 75 %
Number Of Membranes 1 2 3
Feed Water Required (maximum) 10gpm 12 gpm 14 gpm
Drain Required (maximum) 10gpm 12 gpm 14 gpm
Motor Horse Power 3/4 1 1 1/2
Electrical Requirement* 8 amps 10 amps 12 amps
Dimensions W x D x H 20 x 20 x 50 20 x 20 x 50 20 x 26 x 50
Shipping Weight (estimated lbs) 120 150 180
Notes: Maximum production based on a feed water of 77°F, SDI < 1, 1000 ppm TDS, and pH 7. Individual membrane productivity may vary (± 15%). May be operated on other feed waters with reduced capacity. Percent Rejection is based on membrane manufactures specifications; overall system percent rejection may be less.